OHTAKE screw feeders and dispensers
Feeder screws OHTAKE OM26M40
Série OMM jsou poloautomatická podávací zařízení. Do zásobníku se nasypou šrouby o průměru od 2mm do 6 mm a délek do25mm. Pomocí mechanismu dochází k orientovanému řazení šroubků do dráhy, ze které pracovník pomocí magnetického bitu nebo jiného systému odebere šroub a provede jeho montáž.
-
Producer
-
performancePro ruční montáže
-
ClassificationPrůmyslové
-
screw diameter4 mm
Feeder screws OHTAKE OM26M50
Série OMM jsou poloautomatická podávací zařízení. Do zásobníku se nasypou šrouby o průměru od 2mm do 6 mm a délek do25mm. Pomocí mechanismu dochází k orientovanému řazení šroubků do dráhy, ze které pracovník pomocí magnetického bitu nebo jiného systému odebere šroub a provede jeho montáž.
-
Producer
-
performancePro ruční montáže
-
ClassificationPrůmyslové
-
screw diameter5 mm
Feeder screws OHTAKE OM26M60
Série OMM jsou poloautomatická podávací zařízení. Do zásobníku se nasypou šrouby o průměru od 2mm do 6 mm a délek do25mm. Pomocí mechanismu dochází k orientovanému řazení šroubků do dráhy, ze které pracovník pomocí magnetického bitu nebo jiného systému odebere šroub a provede jeho montáž.
-
Producer
-
performancePro ruční montáže
-
ClassificationPrůmyslové
-
screw diameter6 mm
Feeder screws OHTAKE OM26R20
OMR Podavače QUICHER pro automatická šroubovací stanoviště .Podavač podává šrouby do přesné posice, ze které si automat šrouby pomocí magnetického bitu nebo jiného systému odebírá. K dodání pro šrouby od 2,0 do 6,0mm a délek do 25mm.
-
Producer
-
performancePro roboty
-
ClassificationPrůmyslové
-
screw diameter2 mm
Feeder screws OHTAKE OM26R23
OMR Podavače QUICHER pro automatická šroubovací stanoviště .Podavač podává šrouby do přesné posice, ze které si automat šrouby pomocí magnetického bitu nebo jiného systému odebírá. K dodání pro šrouby od 2,0 do 6,0mm a délek do 25mm.
-
Producer
-
performancePro roboty
-
ClassificationPrůmyslové
-
screw diameter2.3 mm
Feeder screws OHTAKE OM26R26
OMR Podavače QUICHER pro automatická šroubovací stanoviště .Podavač podává šrouby do přesné posice, ze které si automat šrouby pomocí magnetického bitu nebo jiného systému odebírá. K dodání pro šrouby od 2,0 do 6,0mm a délek do 25mm.
-
Producer
-
performancePro roboty
-
ClassificationPrůmyslové
-
screw diameter2.6 mm
Feeder screws OHTAKE OM26R30
OMR Podavače QUICHER pro automatická šroubovací stanoviště .Podavač podává šrouby do přesné posice, ze které si automat šrouby pomocí magnetického bitu nebo jiného systému odebírá. K dodání pro šrouby od 2,0 do 6,0mm a délek do 25mm.
-
Producer
-
performancePro roboty
-
ClassificationPrůmyslové
-
screw diameter3 mm
Feeder screws OHTAKE OM26R35
OMR Podavače QUICHER pro automatická šroubovací stanoviště .Podavač podává šrouby do přesné posice, ze které si automat šrouby pomocí magnetického bitu nebo jiného systému odebírá. K dodání pro šrouby od 2,0 do 6,0mm a délek do 25mm.
-
Producer
-
performancePro roboty
-
ClassificationPrůmyslové
-
screw diameter3.5 mm
Feeder screws OHTAKE OM26R40
OMR Podavače QUICHER pro automatická šroubovací stanoviště .Podavač podává šrouby do přesné posice, ze které si automat šrouby pomocí magnetického bitu nebo jiného systému odebírá. K dodání pro šrouby od 2,0 do 6,0mm a délek do 25mm.
-
Producer
-
performancePro roboty
-
ClassificationPrůmyslové
-
screw diameter4 mm
Feeder screws OHTAKE OM26R50
OMR Podavače QUICHER pro automatická šroubovací stanoviště .Podavač podává šrouby do přesné posice, ze které si automat šrouby pomocí magnetického bitu nebo jiného systému odebírá. K dodání pro šrouby od 2,0 do 6,0mm a délek do 25mm.
-
Producer
-
performancePro roboty
-
ClassificationPrůmyslové
-
screw diameter5 mm
Feeder screws OHTAKE OM26R60
OMR Podavače QUICHER pro automatická šroubovací stanoviště .Podavač podává šrouby do přesné posice, ze které si automat šrouby pomocí magnetického bitu nebo jiného systému odebírá. K dodání pro šrouby od 2,0 do 6,0mm a délek do 25mm.
-
Producer
-
performancePro roboty
-
ClassificationPrůmyslové
-
screw diameter6 mm
Feeder screws QUICHER NJ1217
NJ series are semi-automatic feeding device. The tray are poured screws with a diameter of 1.1 to 5.0 mm and lengths from 0.3 to 18 mm. Using the mechanism is oriented to sort screws into the path of the worker using the magnetic bit or else the system removes the screw and makes its installation.
-
Producer
-
performancePro ruční montáže
-
ClassificationPrůmyslové
-
screw diameter1.7 mm
Feeder screws QUICHER NJ2320
NJ series are semi-automatic feeding device. The tray are poured screws with a diameter of 1.1 to 5.0 mm and lengths from 0.3 to 18 mm. Using the mechanism is oriented to sort screws into the path of the worker using the magnetic bit or else the system removes the screw and makes its installation.
-
Producer
-
performancePro ruční montáže
-
ClassificationPrůmyslové
-
screw diameter2 mm
Feeder screws QUICHER NJ2330
NJ series are semi-automatic feeding device. The tray are poured screws with a diameter of 1.1 to 5.0 mm and lengths from 0.3 to 18 mm. Using the mechanism is oriented to sort screws into the path of the worker using the magnetic bit or else the system removes the screw and makes its installation.
-
Producer
-
performancePro ruční montáže
-
ClassificationPrůmyslové
-
screw diameter3 mm
Feeder screws QUICHER NJ2326
NJ series are semi-automatic feeding device. The tray are poured screws with a diameter of 1.1 to 5.0 mm and lengths from 0.3 to 18 mm. Using the mechanism is oriented to sort screws into the path of the worker using the magnetic bit or else the system removes the screw and makes its installation.
-
Producer
-
performancePro ruční montáže
-
ClassificationPrůmyslové
-
screw diameter2.6 mm
Feeder screws QUICHER NJ2323
NJ series are semi-automatic feeding device. The tray are poured screws with a diameter of 1.1 to 5.0 mm and lengths from 0.3 to 18 mm. Using the mechanism is oriented to sort screws into the path of the worker using the magnetic bit or else the system removes the screw and makes its installation.
-
Producer
-
performancePro ruční montáže
-
ClassificationPrůmyslové
-
screw diameter2.3 mm
Feeder screws QUICHER NJ4535
NJ series are semi-automatic feeding device. The tray are poured screws with a diameter of 1.1 to 5.0 mm and lengths from 0.3 to 18 mm. Using the mechanism is oriented to sort screws into the path of the worker using the magnetic bit or else the system removes the screw and makes its installation.
-
Producer
-
performancePro ruční montáže
-
ClassificationPrůmyslové
-
screw diameter3.5 mm
Feeder screws QUICHER NJ4540
NJ series are semi-automatic feeding device. The tray are poured screws with a diameter of 1.1 to 5.0 mm and lengths from 0.3 to 18 mm. Using the mechanism is oriented to sort screws into the path of the worker using the magnetic bit or else the system removes the screw and makes its installation.
-
Producer
-
performancePro ruční montáže
-
ClassificationPrůmyslové
-
screw diameter4 mm
Feeder screws QUICHER NJ4550
NJ series are semi-automatic feeding device. The tray are poured screws with a diameter of 1.1 to 5.0 mm and lengths from 0.3 to 18 mm. Using the mechanism is oriented to sort screws into the path of the worker using the magnetic bit or else the system removes the screw and makes its installation.
-
Producer
-
performancePro ruční montáže
-
ClassificationPrůmyslové
-
screw diameter5 mm
Feeder screws QUICHER NJR1214
NJR and NSR QUICHER feeders for automatic screw post. Feeder screws served in the position of precision, of which the machine screws using a magnetic bit or another system takes. The supply screw from 1.1 to 5.0 mm and lengths from 0.3 to 18 mm.
-
Producer
-
performancePro roboty
-
ClassificationPrůmyslové
-
screw diameter1.4 mm
Feeder screws QUICHER NJR1217
NJR and NSR QUICHER feeders for automatic screw feeder station serves the screws to the position of precision, from which the machine screws using a magnetic bit or another system takes. The supply screw from 1.1 to 5.0 mm and lengths from 0.3 to 18 mm.
-
Producer
-
performancePro roboty
-
ClassificationPrůmyslové
-
screw diameter1.7 mm
Feeder screws QUICHER NJR2320
NJR and NSR QUICHER feeders for automatic screw feeder station serves the screws to the position of precision, from which the machine screws using a magnetic bit or another system takes. The supply screw from 1.1 to 5.0 mm and lengths from 0.3 to 18 mm.
-
Producer
-
performancePro roboty
-
ClassificationPrůmyslové
-
screw diameter, 2 mm