For manual assembly
An ideal solution for oriented feeding for manual assembly jobs.
Feeder screws QUICHER NSB10
NSB series are semi-automatic feeding device. The tray are poured screw diameter from 1.1 to 3.0 mm, and lengths from 0.3 to 18 mm. Using the mechanism is oriented to sort screws into the path of the worker using the magnetic bit or else the system removes the screw and makes its installation.
-
Producer
-
performancePro ruční montáže
-
ClassificationPrůmyslové
-
screw diameter1 mm
Feeder screws QUICHER NSB12
NSB series are semi-automatic feeding device. The tray are poured screw diameter from 1.1 to 3.0 mm, and lengths from 0.3 to 18 mm. Using the mechanism is oriented to sort screws into the path of the worker using the magnetic bit or else the system removes the screw and makes its installation.
-
Producer
-
performancePro ruční montáže
-
ClassificationPrůmyslové
-
screw diameter1.2 mm
Feeder screws QUICHER NSB14
NSB series are semi-automatic feeding device. The tray are poured screw diameter from 1.1 to 3.0 mm, and lengths from 0.3 to 18 mm. Using the mechanism is oriented to sort screws into the path of the worker using the magnetic bit or else the system removes the screw and makes its installation.
-
Producer
-
performancePro ruční montáže
-
ClassificationPrůmyslové
-
screw diameter1.4 mm
Feeder screws QUICHER NSB17
NSB series are semi-automatic feeding device. The tray are poured screw diameter from 1.1 to 3.0 mm, and lengths from 0.3 to 18 mm. Using the mechanism is oriented to sort screws into the path of the worker using the magnetic bit or else the system removes the screw and makes its installation.
-
Producer
-
performancePro ruční montáže
-
ClassificationPrůmyslové
-
screw diameter1.7 mm
Feeder screws QUICHER NSB20
NSB series are semi-automatic feeding device. The tray are poured screw diameter from 1.1 to 3.0 mm, and lengths from 0.3 to 18 mm. Using the mechanism is oriented to sort screws into the path of the worker using the magnetic bit or else the system removes the screw and makes its installation.
-
Producer
-
performancePro ruční montáže
-
ClassificationPrůmyslové
-
screw diameter2 mm
Feeder screws QUICHER NSB23
NSB series are semi-automatic feeding device. The tray are poured screw diameter from 1.1 to 3.0 mm, and lengths from 0.3 to 18 mm. Using the mechanism is oriented to sort screws into the path of the worker using the magnetic bit or else the system removes the screw and makes its installation.
-
Producer
-
performancePro ruční montáže
-
ClassificationPrůmyslové
-
screw diameter2.3 mm
Feeder screws QUICHER NSB26
NSB series are semi-automatic feeding device. The tray are poured screw diameter from 1.1 to 3.0 mm, and lengths from 0.3 to 18 mm. Using the mechanism is oriented to sort screws into the path of the worker using the magnetic bit or else the system removes the screw and makes its installation.
-
Producer
-
performancePro ruční montáže
-
ClassificationPrůmyslové
-
screw diameter2.6 mm
Feeder screws QUICHER NSB30
NSB series are semi-automatic feeding device. The tray are poured screw diameter from 1.1 to 3.0 mm, and lengths from 0.3 to 18 mm. Using the mechanism is oriented to sort screws into the path of the worker using the magnetic bit or else the system removes the screw and makes its installation.
-
Producer
-
performancePro ruční montáže
-
ClassificationPrůmyslové
-
screw diameter3 mm
Feeder screws OHTAKE OM26M20
Série OMM jsou poloautomatická podávací zařízení. Do zásobníku se nasypou šrouby o průměru od 2mm do 6 mm a délek do25mm. Pomocí mechanismu dochází k orientovanému řazení šroubků do dráhy, ze které pracovník pomocí magnetického bitu nebo jiného systému odebere šroub a provede jeho montáž.
-
Producer
-
performancePro ruční montáže
-
ClassificationPrůmyslové
-
screw diameter2 mm
Feeder screws OHTAKE OM26M23
Série OMM jsou poloautomatická podávací zařízení. Do zásobníku se nasypou šrouby o průměru od 2mm do 6 mm a délek do25mm. Pomocí mechanismu dochází k orientovanému řazení šroubků do dráhy, ze které pracovník pomocí magnetického bitu nebo jiného systému odebere šroub a provede jeho montáž.
-
Producer
-
performancePro ruční montáže
-
ClassificationPrůmyslové
-
screw diameter2.3 mm
Feeder screws OHTAKE OM26M26
Série OMM jsou poloautomatická podávací zařízení. Do zásobníku se nasypou šrouby o průměru od 2mm do 6 mm a délek do25mm. Pomocí mechanismu dochází k orientovanému řazení šroubků do dráhy, ze které pracovník pomocí magnetického bitu nebo jiného systému odebere šroub a provede jeho montáž.
-
Producer
-
performancePro ruční montáže
-
ClassificationPrůmyslové
-
screw diameter2.6 mm
Feeder screws OHTAKE OM26M30
Série OMM jsou poloautomatická podávací zařízení. Do zásobníku se nasypou šrouby o průměru od 2mm do 6 mm a délek do25mm. Pomocí mechanismu dochází k orientovanému řazení šroubků do dráhy, ze které pracovník pomocí magnetického bitu nebo jiného systému odebere šroub a provede jeho montáž.
-
Producer
-
performancePro ruční montáže
-
ClassificationPrůmyslové
-
screw diameter3 mm
Feeder screws OHTAKE OM26M35
Série OMM jsou poloautomatická podávací zařízení. Do zásobníku se nasypou šrouby o průměru od 2mm do 6 mm a délek do25mm. Pomocí mechanismu dochází k orientovanému řazení šroubků do dráhy, ze které pracovník pomocí magnetického bitu nebo jiného systému odebere šroub a provede jeho montáž.
-
Producer
-
performancePro ruční montáže
-
ClassificationPrůmyslové
-
screw diameter3.5 mm
Feeder screws OHTAKE OM26M40
Série OMM jsou poloautomatická podávací zařízení. Do zásobníku se nasypou šrouby o průměru od 2mm do 6 mm a délek do25mm. Pomocí mechanismu dochází k orientovanému řazení šroubků do dráhy, ze které pracovník pomocí magnetického bitu nebo jiného systému odebere šroub a provede jeho montáž.
-
Producer
-
performancePro ruční montáže
-
ClassificationPrůmyslové
-
screw diameter4 mm
Feeder screws OHTAKE OM26M50
Série OMM jsou poloautomatická podávací zařízení. Do zásobníku se nasypou šrouby o průměru od 2mm do 6 mm a délek do25mm. Pomocí mechanismu dochází k orientovanému řazení šroubků do dráhy, ze které pracovník pomocí magnetického bitu nebo jiného systému odebere šroub a provede jeho montáž.
-
Producer
-
performancePro ruční montáže
-
ClassificationPrůmyslové
-
screw diameter5 mm
Feeder screws OHTAKE OM26M60
Série OMM jsou poloautomatická podávací zařízení. Do zásobníku se nasypou šrouby o průměru od 2mm do 6 mm a délek do25mm. Pomocí mechanismu dochází k orientovanému řazení šroubků do dráhy, ze které pracovník pomocí magnetického bitu nebo jiného systému odebere šroub a provede jeho montáž.
-
Producer
-
performancePro ruční montáže
-
ClassificationPrůmyslové
-
screw diameter6 mm
Feeder screws QUICHER NJ1217
NJ series are semi-automatic feeding device. The tray are poured screws with a diameter of 1.1 to 5.0 mm and lengths from 0.3 to 18 mm. Using the mechanism is oriented to sort screws into the path of the worker using the magnetic bit or else the system removes the screw and makes its installation.
-
Producer
-
performancePro ruční montáže
-
ClassificationPrůmyslové
-
screw diameter1.7 mm
Feeder screws QUICHER NJ2320
NJ series are semi-automatic feeding device. The tray are poured screws with a diameter of 1.1 to 5.0 mm and lengths from 0.3 to 18 mm. Using the mechanism is oriented to sort screws into the path of the worker using the magnetic bit or else the system removes the screw and makes its installation.
-
Producer
-
performancePro ruční montáže
-
ClassificationPrůmyslové
-
screw diameter2 mm
Feeder screws QUICHER NJ2330
NJ series are semi-automatic feeding device. The tray are poured screws with a diameter of 1.1 to 5.0 mm and lengths from 0.3 to 18 mm. Using the mechanism is oriented to sort screws into the path of the worker using the magnetic bit or else the system removes the screw and makes its installation.
-
Producer
-
performancePro ruční montáže
-
ClassificationPrůmyslové
-
screw diameter3 mm
Feeder screws QUICHER NJ2326
NJ series are semi-automatic feeding device. The tray are poured screws with a diameter of 1.1 to 5.0 mm and lengths from 0.3 to 18 mm. Using the mechanism is oriented to sort screws into the path of the worker using the magnetic bit or else the system removes the screw and makes its installation.
-
Producer
-
performancePro ruční montáže
-
ClassificationPrůmyslové
-
screw diameter2.6 mm
Feeder screws QUICHER NJ2323
NJ series are semi-automatic feeding device. The tray are poured screws with a diameter of 1.1 to 5.0 mm and lengths from 0.3 to 18 mm. Using the mechanism is oriented to sort screws into the path of the worker using the magnetic bit or else the system removes the screw and makes its installation.
-
Producer
-
performancePro ruční montáže
-
ClassificationPrůmyslové
-
screw diameter2.3 mm
Feeder screws QUICHER NJ4535
NJ series are semi-automatic feeding device. The tray are poured screws with a diameter of 1.1 to 5.0 mm and lengths from 0.3 to 18 mm. Using the mechanism is oriented to sort screws into the path of the worker using the magnetic bit or else the system removes the screw and makes its installation.
-
Producer
-
performancePro ruční montáže
-
ClassificationPrůmyslové
-
screw diameter3.5 mm
Feeder screws QUICHER NJ4540
NJ series are semi-automatic feeding device. The tray are poured screws with a diameter of 1.1 to 5.0 mm and lengths from 0.3 to 18 mm. Using the mechanism is oriented to sort screws into the path of the worker using the magnetic bit or else the system removes the screw and makes its installation.
-
Producer
-
performancePro ruční montáže
-
ClassificationPrůmyslové
-
screw diameter4 mm
Feeder screws QUICHER NJ4550
NJ series are semi-automatic feeding device. The tray are poured screws with a diameter of 1.1 to 5.0 mm and lengths from 0.3 to 18 mm. Using the mechanism is oriented to sort screws into the path of the worker using the magnetic bit or else the system removes the screw and makes its installation.
-
Producer
-
performancePro ruční montáže
-
ClassificationPrůmyslové
-
screw diameter5 mm